2-Way multiprotocol radio control panel with 8 inputs and 8 outputs (expandable to 32 IN-OUT) and 3 service channels (network, tamper and battery). 28 bidirectional wireless devices + 4 repeater, 4 partitions.
Log with max 512 events. Back-up connection on PSTN (with IF-TL) and GSM (with BT-GSM). Plastic case with tamper. The unit is provided with a remote control and an indoor siren.
| Power supply | 110/230Vac 50Hz / 13,8Vcc, with 4A switching power supply |
| Battery | 12V, 7,5Ah max |
| Power consumption at 230V | 130mA in stand-by (RX mode) 300mA in transmission at max power |
| Power consumption at 12V: | 170mA in stand-by (RX mode) 3,5A in transmission at max power |
| Range frequency | VHF (156÷174MHz) UHF (430÷470MHz) |
| Channel spacing | 12,5KHz |
| Radio deviation | ± 1.65 Khz |
| Stability in frequency | 2,5ppm –20 ÷ +70°C |
| TX power | 1/5/10W programmable |
| Receiver system | Double conversion superheterodyne |
| Receiver sensitivity | >12dB Sinad –118dBm |
| Communication protocol |
|
| Audio encodings | No. 40 programmable Subtone frequencies CTCSS No. 15 transponder tones |
| Partitions | 4 independents Configurable time of entry, exit, auto-arming. Ronda area. Management of common zones with two types of arming (normal, Master) |
| Types of arming | Two for each area: Total and Perimetral. Management Exclusion zones in Alarm, Programmable reinclusion |
| Scheduler | 2 hours of arming/disarming for each partitions on a weekly basis |
| Wired zones | 8 zones expandable to 24 Impedance 100KOhm, configurable NC, NO or double-balanced, immediate / delayed; Panic / Emergency / Fire, 24H, insertion area |
| Outputs | 8 outputs expandable to 24 Open collector to GND, 100mA max.; monostable or bistable |
| Other outputs |
|
| Check battery | Continuous monitoring voltage |
| Test dynamic battery | Yes, programmable each 1/5/10/20/30 days |
| Control voltage | Check continuous of voltage |
| Opening the case | Test continuous for opening case |
| Antenna cut |
|
| Interfaces |
|
| PSTN module management | Yes with optional interface |
| GSM module management | Yes with optional interface |
| I/O Expansions add | 2 |
| Wired Keyboards | 4 |
| Key reader | 4 |
| Access Keys | 16 |
| Wired Proximity Readers | 4 |
| Card / Proximity tag | 16 |
| Wireless outdoor sirens | 2 |
| Radio protocol | SICEP BiTech radio network (proprietary protocol) with integrated module 868MHz, 3 selectable channels |
| BiTech wireless devices | 28 + 4 REP |
| Event log | 512 |
| LED Signals | Mains, low battery, receiving a valid signal, TX, Rep mode, power |
| Others |
|
| Operating environment temperature | Temperature from -10° to +55° C; Humidity from 20% to 80% |
| Case Protection | IP 30 |
| Dimensions | 31 x 29 x 9,5 cm (without antenna) |
| Weight | 1,45 Kg without battery, 4,25Kg with 7,2Ah battery |
To view the manuals, you need to log in.
CLICK HERE if you are already logged in otherwise log in
To view the firmware it is necessary to login.
CLICK HERE if you are already logged in otherwise log in
| IRS-CB.V01 | Power 230Vac, VHF, 10W power, canalization at 12,5KHz, 156÷174MHz Frequency |
| IRS-CB.U01 | Power 230Vac, UHF, 10W power, canalization at 12,5KHz, 430÷470MHz Frequency |
| ANT-S158 | 5/8 omnidirectional antenna. |
| ANT-S455 | 5/8 omnidirectional antenna. |
| BT-EX8/3 | Expansion module 8 inputs – 8 outputs. |
| BT-LTE | GPRS/LTE module. |
| IF-TL | Telephone interface card. |
| BT-KT | Bi-directional 5-channel BiTech remote control. |
| BT-SKB | Wired “S series” capacitive keyboard. |
| BT-SKW | BiTech bi-directional radio “S series” capacitive keyboard. |
| BT-KR2 | Universal flush-mounted proximity reader. |
| BT-PRX/WH | Indoor proximity reader. White color. |
| BT-PRW/WH | BiTech bi-directional radio proximity reader for indoor use. White color. |
| BT-CARD | Credit card shaped proximity key. |
| BT-TAG | Key proximity tag. |
| BT-CMXE | BiTech radio magnetic contact with auxiliary input. |
| BT-CMXW | Multifunction BiTech radio magnetic contact. |
| ACI-CINPGM5 | Low absorption piezoelectric glass break detection sensor, white color. |
| ACI-CINPGM5MA | Piezoelectric low absorption glass break detection sensor, brown color. |
| ACI-CINEM5 | Low absorption piezoelectric vibration / seismic sensor, white color. |
| ACI-CINEM5MA | Low absorption piezoelectric vibration / seismic sensor, brown color. |
| ACI-CINEM046 | Piezoelectric vibration / seismic sensor for low absorption surfaces or grates. |
| BT-IRW/2 | BiTech infrared radio sensor. Coverage 90 ° 15mt. |
| BT-IRE2.01 | Outdoor dual beam PIR detector BiTech radio. Portata12m. |
| BT-IRE2.02 | Double barrier PIR detector for external BiTech radio. Range 24m. |
| BT-IRE2.03 | Outdoor dual beam PIR detector with BiTech radio anti-masking. Range 12m. |
| BT-IRE2.04 | Outdoor barrier PIR detector with BiTech radio anti-masking. Range 2 – 5m. |
| BT-IRE2.05 | BiTech bi-directional radio curtain outdoor double-beam PIR detector. |
| BT-IRE2.05B | BiTech bi-directional radio curtain outdoor double-beam PIR detector. |
| BT-IRE2.06 | BiTech TX – RX radio barrier with 2/4/6/8 IR beams with a height from 50cm to 3m (double optics). |
| BT-IRE2.07 | BiTech radio barrier type TX – RX mono IR beam height 18cm (double optics). |
| BT-IRE2.08 | BiTech column barrier TX – RX with 2/3/4/6 IR beams with height from 1m to 2.5m (double optics). |
| BT-ODT.01 | Dual technology PIR + Microwave detector with external BiTech radio anti-masking. Range 12m. 90 °. |
| BT-ODT.02 | BiTech dual technology PIR + Microwave detector with curtain effect for outdoor use. Range 12m. 7.5 °. |
| BT-SMK2 | Wireless Smoke detector. |
| BT-SIR | BiTech radio outdoor siren. |
| BT-REP/2 |
Radio (BiTech) and video (VTech) signal repeater.
|
