1-Way multiprotocol radio unit, with 8 inputs (expandable to 32 IN) and 3 service channels (network, tamper and battery). Log with max 512 events. Plastic case with tamper.
| Power supply | 110/230Vac 50Hz / 13,8Vcc, with 4A switching power supply |
| Battery | 12V, 7,5Ah max |
| Power consumption at 230V | 50mA in stand-by (RX mode) 300mA in transmission at max power |
| Power consumption at 12V: | 120mA in stand-by (RX mode) 3,5A in transmission at max power |
| Range frequency | VHF (156÷174MHz) UHF (430÷470MHz) |
| Channel spacing | 12,5KHz |
| Radio deviation | ± 1.65 Khz |
| Stability in frequency | 2,5ppm –20 ÷ +70°C |
| TX power | 1/5/10W programmable |
| Communication protocol |
|
| Audio encodings | No. 40 programmable Subtone frequencies CTCSS No. 15 transponder tones |
| Input channels | 8 expandable to 32 Impedance 100KOhm, configurable NC, NO or double-balanced |
| Other inputs | No. 1 enabling input, 100Kohm impedance |
| Other outputs |
|
| Check battery | Continuous monitoring voltage |
| Control voltage | Check continuous of voltage |
| Opening the case | Test continuous for opening case |
| Antenna cut |
|
| Interfaces |
|
| LED Signals | Mains, low battery, TX, power |
| Others |
|
| Operating environment temperature | Temperature from -10° to +55° C; Humidity from 20% to 80% |
| Case Protection | IP 30 |
| Dimensions | 31 x 29 x 9,5 cm (without antenna) |
| Weight | 1,45 Kg without battery, 4,25Kg with 7,2Ah battery |
| Optional kits |
|
To view the manuals, you need to log in.
CLICK HERE if you are already logged in otherwise log in
To view the firmware it is necessary to login.
CLICK HERE if you are already logged in otherwise log in
| IRS-8M.V | Power 230Vac, VHF, 10W power, canalization at 12,5KHz, 156÷174MHz Frequency |
| IRS-8M.U | Power 230Vac, UHF, 10W power, canalization at 12,5KHz, 430÷470MHz Frequency |
